Repairing Tub Drain Stopper

Home » Hardware » Repairing Tub Drain Stopper

Tub Drain Stopper – Bathtub drain can fail for water leaks, obstruction or plug is not working properly. An inexperienced owner can repair drain plug the tub and remove an obstruction while repairing pipes leak under the bath. Requires a homeowner to have some experience DIY plumbing, including the adjustment of pipe connections.

Posted on October 12, 2017 Hardware

Tina plugs built without a pop-up mechanism depend on a brass. Plunger to limit the flow of water through the drain of the tub. The brass piston is at the end of a bond between the back cover of the tub overflow and extends down the overflow pipe. If the shutter does not work properly, you must remove the anchor bolts overflow cover. And pull the cover overflow tub drain stopper opening, keeps pulling until removing the overflow pipe coupling. If the plunger brass is not attached to the link, use a soft recovery tool to get the overflow pipe.

12 Photos Gallery of: Repairing Tub Drain Stopper

Tub Drain Stopper SmallSize: 1280 x 720

Tub Drain Stopper RubberSize: 1000 x 1000

Tub Drain Stopper PlugSize: 800 x 800

Tub Drain Stopper PlateSize: 1106 x 737

Tub Drain Stopper BrassSize: 1200 x 630

With the overflow tub drain stopper pipe coupling, you can adjust its length by loosening the locknut on the link and then turning the plastic sleeve. When a pop-up stopper not let water out or keep in the tub, you should make adjustments in the mechanism. You must remove the overflow cover and pull the coupling nut until exposing the joint. Turning the nut in a way that will lengthen the coupling while turning the other way shortened.

RELATED TOPIC :   Brushed nickel Toilet Paper Holder Ceramic