Neo Angle Shower Base Ideas 

Home » Hardware » Neo Angle Shower Base Ideas 

Neo angle shower base – Neo-angle shower bases installed in a corner and provide a solid floor for your corner shower. The base mounts flush up against the studs in your bathroom where the existing shower currently resides. Most neo-angle shower bases include everything you need for installation including drain, but some bases requires a drain purchased separately. Expect to spend at least five hours on this project, and perhaps more, depending on your experience and skill level.

Posted on August 19, 2017 Hardware

Remove the existing shower by cutting into the plaster, tiles or shower walls with a reciprocal saw. And then tear it from the pin with a crowbar and hammer. Screw the tub with a screwdriver, cut the drain in the tub or shower base with reciprocal saw. And remove the tub or shower base by sliding it out of the shower alcove.  Install the drain in the neo angle shower base. Set up the drain in the shower floor drain hole and thread the well’s lock nut on the drain wires below the shower floor. Tighten the nut with a wrench.

12 Photos Gallery of: Neo Angle Shower Base Ideas 

New Neo Angle Shower BaseSize: 1000 x 1000

As a result install a neo angle shower base. And cover the floor with roofing felt and staple the felt to the floor. Then place the shower floor on the blanket or mortar base and level all sides with a spirit level. Install the shims under the base in any area where the base falls below the limit mark. Fasten the base to the studs with the supplied clamp brackets, screws and a screwdriver, after the base is level.

RELATED TOPIC :   Tips For Bronze Bathroom Faucet